FILLFAST 100: Piston fillers for small volumes of up to 560ml

  • Fillfast 100
  • Fillfast 100
  • Fillfast 100
  • Fillfast 100
Technical properties

The Fill Fast 100 machine is the smallest dosing machine in the “Fill Fast” range. Despite its compact construction, it can be programmed to achieve a maximum stroke volume of 560ml. All products that can be pumped, be they liquid, pastas or mixtures containing solid pieces, can be dosed undamaged and highly accurately. As a rule, the machine is suited for hotfill applications of up to 95°C. The single-head model machine only takes up a surface area of 0.3m². The multi-head model can be dismantled in a jiffy so that it can be thoroughly cleaned without using any special tools. The machine is available as a vertical or as a horizontal (low-level and semi-low-level) machine.

Basic model
  •   Fully constructed in stainless steel in a mobile frame
  •   Hopper with content of 40L, which is provided with a safety hatch
  •   Pneumatically powered filling head with a passage of 12mm or 20mm
  •   External communication port for starting signal coming from "no tray no fill" sensor, foot pedal, etc.
  •   Automatic cleaning cycle operation
  •   Control of dosing speed
  •   Set dosing volume by hand wheel
  •   Speed: 10 - 25 cycles per minute
  •   Number of dosing cylinders is 1 - 16
  •   Compression air consumption: approx. 300 NL/minute at a min. of 5 bar
  •   Interface connection with external packing machine
  •   Larger product hopper up to a content of 100L
  •   Double-walled type of hopper
  •   Electrically heated type of hopper with thermostatic control
  •   Horizontal or vertical electrically powered agitator
  •   Level detection to operate transfer pump
  •   Adjusted filling head(s) according to product specifications and dosing aspect
  •   Control height of filling head(s) by hand wheel
  •   Pneumatic dip movement of dosing head(s)

  •   UPGRADE to servo-powered versions
  •   Control of suction and dosing speed and of dosing volume through servo-power and PLC control
  •   User-friendly control panel
  •   Dosing parameters to be kept per type of product
  •   Dip movement with servo-power
  •   Walking beam movement of the filling heads
  •   Temperature registration and control
  •   Data logging to be exported to HACCP software